BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS744

  • Size8x18"
  • PCD5x120
  • OffsetET20
  • Centre bore74.1 mm

BBS RS744 is a part number from the RS II range, which kept the mesh look of the RS on a two-piece construction. It measures 8x18 inches and is listed for BMW e39.

The 5x120 bolt pattern of the BBS RS744 is the one used by BMW and some Land Rover and Honda; the 74.1 mm centre bore decides whether you need hub-centric rings.

The BBS RS744 uses ET20, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.

At 18 inches, the BBS RS744 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Note on record: 42 style BMW.

More on where the BBS RS744 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS744 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7445x1201882074.1——BMW e3942 style BMW

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models