BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS748

  • Size8x17"
  • PCD5x114.3
  • OffsetET38

BBS RS748 is a part number from the RS II range, which kept the mesh look of the RS on a two-piece construction. It measures 8x17 inches.

The 5x114.3 bolt pattern of the BBS RS748 is the one used by many Japanese and Korean cars.

At ET38 the BBS RS748 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

Before fitting a 17-inch BBS RS748, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The centre bore and fitment of the BBS RS748 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

For the history behind the BBS RS748, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS748 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7485x114.317838—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models