BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS750

  • Size9x17"
  • PCD5x114.3
  • OffsetET47
  • Centre bore73 mm

BBS RS750 is a part number from the RS II family of two-piece mesh wheels. Size is 9J x 17.

On the BBS RS750, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the 73 mm centre bore decides whether you need hub-centric rings.

ET47 is a high offset for the BBS RS750, so it tucks well inside the arch, as front-drive and most modern cars need. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.

Before fitting a 17-inch BBS RS750, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The fitment of the BBS RS750 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

For the history behind the BBS RS750, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS750 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7505x114.31794773————

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models