
BBS RSII series
BBS RS755
- Size8x18"
- PCD5x114.3
- OffsetET42
This page covers the BBS RS755, one wheel from the RS II, the two-piece successor to the original RS. It measures 8x18 inches.
The 5x114.3 bolt pattern of the BBS RS755 is the one used by many Japanese and Korean cars.
At ET42 the BBS RS755 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
Before fitting an 18-inch BBS RS755, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
No centre bore or fitment figure is recorded for the BBS RS755. Read the markings on the back of the wheel before relying on it.
More on where the BBS RS755 came from and how it is built is on the BBS RSII page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS755 | 5x114.3 | 18 | 8 | 42 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit