BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS757

  • Size8x18"
  • PCD5x114.3
  • OffsetET48

BBS RS757 is a part number from the RS II range, which kept the mesh look of the RS on a two-piece construction. It is an 18-inch wheel, 8 inches wide.

On the BBS RS757, the 5x114.3 PCD is the one used by many Japanese and Korean cars.

ET48 is a high offset for the BBS RS757, so it tucks well inside the arch, as front-drive and most modern cars need. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.

Before fitting an 18-inch BBS RS757, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The centre bore and fitment of the BBS RS757 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS RS757 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS757 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7575x114.318848—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models