
BBS RSII series
BBS RS759
- Size9x18"
- PCD5x114.3
- OffsetET36
This page covers the BBS RS759, one wheel from the RS II range, which kept the mesh look of the RS on a two-piece construction. It measures 9x18 inches.
The 5x114.3 bolt pattern of the BBS RS759 is the one used by many Japanese and Korean cars.
At ET36 the BBS RS759 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.
At 18 inches, the BBS RS759 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The centre bore and fitment of the BBS RS759 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
The BBS RSII overview covers the background of the BBS RS759 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS759 | 5x114.3 | 18 | 9 | 36 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit