BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS765

  • Size8x17"
  • PCD5x120
  • OffsetET47
  • Centre bore72.5 mm

BBS RS765 is a part number from the RS II, the two-piece successor to the original RS. It measures 8x17 inches and is listed for BMW e36.

The 5x120 bolt pattern of the BBS RS765 is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

At ET47 the BBS RS765 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.

At 17 inches, the BBS RS765 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

More on where the BBS RS765 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS765 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS7655x1201784772.5——BMW e36—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models