
BBS RSII series
BBS RS803
- Size8x18"
- PCD5x100
- OffsetET33
- Centre bore57 mm
BBS RS803 is a part number from the RS II range, which kept the mesh look of the RS on a two-piece construction. Size is 8J x 18 and is listed for vag, TT mk1.
The 5x100 bolt pattern of the BBS RS803 is the one used by VW Group, Subaru and Toyota; the 57 mm centre bore decides whether you need hub-centric rings.
An offset of ET33 puts the BBS RS803 in the usual range for European saloons of its era. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
Before fitting an 18-inch BBS RS803, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
More on where the BBS RS803 came from and how it is built is on the BBS RSII page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS803 | 5x100 | 18 | 8 | 33 | 57 | — | — | vag, TT mk1 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit