
BBS RSII series
BBS RS839
- Size9x17"
- PCD5x114.3
- OffsetET35
The BBS RS839 belongs to the RS II range, which kept the mesh look of the RS on a two-piece construction. Size is 9J x 17 and is listed for nissan.
On the BBS RS839, the 5x114.3 PCD is the one used by many Japanese and Korean cars.
At ET35 the BBS RS839 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.
Before fitting a 17-inch BBS RS839, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
Note on record: RSM.
No centre bore figure is recorded for the BBS RS839. Read the markings on the back of the wheel before relying on it.
More on where the BBS RS839 came from and how it is built is on the BBS RSII page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS839 | 5x114.3 | 17 | 9 | 35 | — | — | — | nissan | RSM |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit