
BBS RSII series
BBS RS844
- Size7x17"
- PCD4x100
- OffsetET48
- Centre bore56.1 mm
This page covers the BBS RS844, one wheel from the RS II family of two-piece mesh wheels. Size is 7J x 17 and is listed for MINI Cooper R56.
On the BBS RS844, the 4x100 PCD is the one used by older BMW, VW, Honda and Mazda; the 56.1 mm centre bore matches Honda hubs.
At ET48 the BBS RS844 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
At 17 inches, the BBS RS844 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Note on record: R90.
More on where the BBS RS844 came from and how it is built is on the BBS RSII page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS844 | 4x100 | 17 | 7 | 48 | 56.1 | — | — | MINI Cooper R56 | R90 |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit