BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS846

  • Size9x20"
  • PCD5x120
  • OffsetET24
  • Centre bore72.5 mm

BBS RS846 is a part number from the RS II, the two-piece successor to the original RS. Size is 9J x 20 and is listed for BMW e65.

The 5x120 bolt pattern of the BBS RS846 is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

The BBS RS846 uses ET24, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.

Before fitting a 20-inch BBS RS846, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Note on record: 101 style bmw.

For the history behind the BBS RS846, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS846 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8465x1202092472.5——BMW e65101 style bmw

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models