BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS850

  • Size8x19"
  • PCD5x120
  • OffsetET20
  • Centre bore72.5 mm

BBS RS850 is a part number from the RS II, the two-piece successor to the original RS. It measures 8x19 inches and is listed for BMW e60.

On the BBS RS850, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the 72.5 mm centre bore matches BMW hubs.

The BBS RS850 uses ET20, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.

At 19 inches, the BBS RS850 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

Note on record: 101 style bmw.

For the history behind the BBS RS850, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS850 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8505x1201982072.5——BMW e60101 style bmw

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models