
BBS RSII series
BBS RS855
- Size9x18"
- PCD5x114.3
- OffsetET37
This page covers the BBS RS855, one wheel from the RS II, the two-piece successor to the original RS. It measures 9x18 inches.
The 5x114.3 bolt pattern of the BBS RS855 is the one used by many Japanese and Korean cars.
ET37 is a high offset for the BBS RS855, so it tucks well inside the arch, as front-drive and most modern cars need. A 9-inch rim normally takes tyres from about 225 to 275 mm wide.
At 18 inches, the BBS RS855 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Note on record: hinodex.
No centre bore or fitment figure is recorded for the BBS RS855. Read the markings on the back of the wheel before relying on it.
More on where the BBS RS855 came from and how it is built is on the BBS RSII page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS855 | 5x114.3 | 18 | 9 | 37 | — | — | — | — | hinodex |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit