BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS864

  • Size8x18"
  • PCD5x108
  • OffsetET45

BBS RS864 is a part number from the RS II, the two-piece successor to the original RS. It measures 8x18 inches and is listed for Volvo.

On the BBS RS864, the 5x108 PCD is the one used by Ford, Volvo, Jaguar and Peugeot.

ET45 is a high offset for the BBS RS864, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.

Before fitting an 18-inch BBS RS864, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

No centre bore figure is recorded for the BBS RS864. Read the markings on the back of the wheel before relying on it.

More on where the BBS RS864 came from and how it is built is on the BBS RSII page.

Specifications

BBS RS864 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8645x10818845———Volvo—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models