
BBS RSII series
BBS RS866
- Size7.5x18"
- PCD5x112
- OffsetET54
- Centre bore57 mm
BBS RS866 is a part number from the RS II range, which kept the mesh look of the RS on a two-piece construction. Size is 7.5J x 18 and is listed for vag.
The 5x112 bolt pattern of the BBS RS866 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 57 mm centre bore decides whether you need hub-centric rings.
At ET54 the BBS RS866 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 195-235 mm are the usual match for a 7.5-inch rim.
Before fitting an 18-inch BBS RS866, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The BBS RSII overview covers the background of the BBS RS866 and its siblings, their construction and buying tips.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS866 | 5x112 | 18 | 7.5 | 54 | 57 | — | — | vag | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit