BBS RSII style illustration
Illustration of the BBS RSII design; no photo of this exact part number.

BBS RSII series

BBS RS868

  • Size7.5x17"
  • PCD5x112
  • OffsetET45
  • Centre bore57 mm

This page covers the BBS RS868, one wheel from the RS II family of two-piece mesh wheels. Size is 7.5J x 17 and is listed for vag.

The 5x112 bolt pattern of the BBS RS868 is the one used by Audi, VW, Mercedes-Benz and later BMW; the 57 mm centre bore decides whether you need hub-centric rings.

At ET45 the BBS RS868 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 195-235 mm are the usual match for a 7.5-inch rim.

Before fitting a 17-inch BBS RS868, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

For the history behind the BBS RS868, how to spot a genuine wheel and what to check when buying used, see the BBS RSII series guide.

Specifications

BBS RS868 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS RS8685x112177.54557——vag—

Size in inches, offset and bore in mm. How to read these figures.

All BBS RSII models