
BBS RSII series
BBS RS873
- Size7x17"
- PCD4x100
- OffsetET48
- Centre bore56.1 mm
The BBS RS873 belongs to the RS II range, which kept the mesh look of the RS on a two-piece construction. It is a 17-inch wheel, 7 inches wide and is listed for MINI Cooper R56.
On the BBS RS873, the 4x100 PCD is the one used by older BMW, VW, Honda and Mazda; the 56.1 mm centre bore matches Honda hubs.
ET48 is a high offset for the BBS RS873, so it tucks well inside the arch, as front-drive and most modern cars need. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.
At 17 inches, the BBS RS873 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
Note on record: R90.
More on where the BBS RS873 came from and how it is built is on the BBS RSII page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS RS873 | 4x100 | 17 | 7 | 48 | 56.1 | — | — | MINI Cooper R56 | R90 |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit