BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM076

  • Size7.5x17"
  • PCD5x114.3
  • OffsetET38

The BBS LM076 belongs to the LM, a two-piece mesh design with a deep polished lip. Size is 7.5J x 17.

On the BBS LM076, the 5x114.3 PCD is the one used by many Japanese and Korean cars.

At ET38 the BBS LM076 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 7.5-inch rim normally takes tyres from about 195 to 235 mm wide.

At 17 inches, the BBS LM076 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The centre bore and fitment of the BBS LM076 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS LM076 came from and how it is built is on the BBS LM page.

Specifications

BBS LM076 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM0765x114.3177.538—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models