BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM077

  • Size9x18"
  • PCD5x114.3
  • OffsetET42

The BBS LM077 belongs to the LM, a two-piece mesh design with a deep polished lip. It measures 9x18 inches.

On the BBS LM077, the 5x114.3 PCD is the one used by many Japanese and Korean cars.

ET42 is a high offset for the BBS LM077, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

At 18 inches, the BBS LM077 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The centre bore and fitment of the BBS LM077 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS LM077 came from and how it is built is on the BBS LM page.

Specifications

BBS LM077 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM0775x114.318942—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models