BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM097

  • Size7x17"
  • PCD4x114.3
  • OffsetET39

BBS LM097 is a part number from the LM range of two-piece mesh wheels. Size is 7J x 17.

On the BBS LM097, the 4x114.3 PCD is the one used by older Nissan and Mitsubishi.

At ET39 the BBS LM097 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 7-inch rim normally takes tyres from about 175 to 225 mm wide.

Before fitting a 17-inch BBS LM097, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The centre bore and fitment of the BBS LM097 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS LM097 came from and how it is built is on the BBS LM page.

Specifications

BBS LM097 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM0974x114.317739—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models