
BBS LM series
BBS LM098
- Size8x18"
- PCD5x120
- OffsetET35
BBS LM098 is a part number from the LM, a two-piece mesh design with a deep polished lip. It measures 8x18 inches and is listed for BMW 3 series.
On the BBS LM098, the 5x120 PCD is the one used by BMW and some Land Rover and Honda.
ET35 is a high offset for the BBS LM098, so it tucks well inside the arch, as front-drive and most modern cars need. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.
Before fitting an 18-inch BBS LM098, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The centre bore of the BBS LM098 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
For the history behind the BBS LM098, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM098 | 5x120 | 18 | 8 | 35 | — | — | — | BMW 3 series | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit