BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM110

  • Size9.5x17"
  • PCD5x112
  • OffsetET32

This page covers the BBS LM110, one wheel from the LM family, often seen on European performance cars. It is a 17-inch wheel, 9.5 inches wide.

On the BBS LM110, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW.

The BBS LM110 uses ET32, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. A 9.5-inch rim normally takes tyres from about 245 to 285 mm wide.

Before fitting a 17-inch BBS LM110, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The centre bore and fitment of the BBS LM110 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS LM110 came from and how it is built is on the BBS LM page.

Specifications

BBS LM110 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM1105x112179.532—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models