
BBS LM series
BBS LM111
- Size10x17"
- PCD5x112
- OffsetET30
This page covers the BBS LM111, one wheel from the LM family, often seen on European performance cars. It measures 10x17 inches.
On the BBS LM111, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW.
An offset of ET30 puts the BBS LM111 in the usual range for European saloons of its era. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.
At 17 inches, the BBS LM111 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The centre bore and fitment of the BBS LM111 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
More on where the BBS LM111 came from and how it is built is on the BBS LM page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM111 | 5x112 | 17 | 10 | 30 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit