
BBS LM series
BBS LM122
- Size8x18"
- PCD5x108
- OffsetET35
- Centre bore67 mm
BBS LM122 is a part number from the LM, a two-piece mesh design with a deep polished lip. Size is 8J x 18 and is listed for Ferrari 348/355.
The 5x108 bolt pattern of the BBS LM122 is the one used by Ford, Volvo, Jaguar and Peugeot; the 67 mm centre bore decides whether you need hub-centric rings.
ET35 is a high offset for the BBS LM122, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 205-245 mm are the usual match for an 8-inch rim.
Before fitting an 18-inch BBS LM122, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
More on where the BBS LM122 came from and how it is built is on the BBS LM page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM122 | 5x108 | 18 | 8 | 35 | 67 | — | — | Ferrari 348/355 | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit