BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM123

  • Size10.5x18"
  • PCD5x108
  • OffsetET65
  • Centre bore67 mm

BBS LM123 is a part number from the LM, a two-piece mesh design with a deep polished lip. It measures 10.5x18 inches and is listed for Ferrari 348/355.

On the BBS LM123, the 5x108 PCD is the one used by Ford, Volvo, Jaguar and Peugeot; the 67 mm centre bore decides whether you need hub-centric rings.

At ET65 the BBS LM123 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 265-315 mm are the usual match for a 10.5-inch rim.

At 18 inches, the BBS LM123 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

For the history behind the BBS LM123, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.

Specifications

BBS LM123 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM1235x1081810.56567——Ferrari 348/355—

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models