
BBS LM series
BBS LM124
- Size8.5x18"
- PCD5x120
- OffsetET30
This page covers the BBS LM124, one wheel from the LM, a two-piece mesh design with a deep polished lip. It is an 18-inch wheel, 8.5 inches wide and is listed for BMW.
The 5x120 bolt pattern of the BBS LM124 is the one used by BMW and some Land Rover and Honda.
The BBS LM124 uses ET30, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.
Before fitting an 18-inch BBS LM124, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
No centre bore figure is recorded for the BBS LM124. Read the markings on the back of the wheel before relying on it.
For the history behind the BBS LM124, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM124 | 5x120 | 18 | 8.5 | 30 | — | — | — | BMW | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit