
BBS LM series
BBS LM125
- Size9.5x18"
- PCD5x120
- OffsetET34
This page covers the BBS LM125, one wheel from the LM, a two-piece mesh design with a deep polished lip. It is an 18-inch wheel, 9.5 inches wide and is listed for BMW.
On the BBS LM125, the 5x120 PCD is the one used by BMW and some Land Rover and Honda.
An offset of ET34 puts the BBS LM125 in the usual range for European saloons of its era. Tyre widths of roughly 245-285 mm are the usual match for a 9.5-inch rim.
At 18 inches, the BBS LM125 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
No centre bore figure is recorded for the BBS LM125. Read the markings on the back of the wheel before relying on it.
More on where the BBS LM125 came from and how it is built is on the BBS LM page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM125 | 5x120 | 18 | 9.5 | 34 | — | — | — | BMW | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit