
BBS LM series
BBS LM126
- Size10x18"
- PCD5x120
- OffsetET30
BBS LM126 is a part number from the LM family, often seen on European performance cars. Size is 10J x 18 and is listed for BMW.
The 5x120 bolt pattern of the BBS LM126 is the one used by BMW and some Land Rover and Honda.
The BBS LM126 uses ET30, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 255-295 mm are the usual match for a 10-inch rim.
At 18 inches, the BBS LM126 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
No centre bore figure is recorded for the BBS LM126. Read the markings on the back of the wheel before relying on it.
For the history behind the BBS LM126, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM126 | 5x120 | 18 | 10 | 30 | — | — | — | BMW | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit