
BBS LM series
BBS LM129
- Size10x18"
- PCD5x112
- OffsetET25
This page covers the BBS LM129, one wheel from the LM family, often seen on European performance cars. It is an 18-inch wheel, 10 inches wide.
On the BBS LM129, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW.
An offset of ET25 puts the BBS LM129 in the usual range for European saloons of its era. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.
At 18 inches, the BBS LM129 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
No centre bore or fitment figure is recorded for the BBS LM129. Read the markings on the back of the wheel before relying on it.
For the history behind the BBS LM129, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM129 | 5x112 | 18 | 10 | 25 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit