BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM130

  • Size9x18"
  • PCD5x130
  • OffsetET50

The BBS LM130 belongs to the LM family, often seen on European performance cars. It measures 9x18 inches and is listed for Porsche.

The 5x130 bolt pattern of the BBS LM130 is the one used by Porsche and some Mercedes-Benz.

ET50 is a high offset for the BBS LM130, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

At 18 inches, the BBS LM130 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

No centre bore figure is recorded for the BBS LM130. Read the markings on the back of the wheel before relying on it.

More on where the BBS LM130 came from and how it is built is on the BBS LM page.

Specifications

BBS LM130 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM1305x13018950———Porsche—

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models