
BBS LM series
BBS LM138
- Size8x17"
- PCD5x112
- OffsetET35
BBS LM138 is a part number from the LM, a two-piece mesh design with a deep polished lip. It is a 17-inch wheel, 8 inches wide.
The 5x112 bolt pattern of the BBS LM138 is the one used by Audi, VW, Mercedes-Benz and later BMW.
ET35 is a high offset for the BBS LM138, so it tucks well inside the arch, as front-drive and most modern cars need. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.
Before fitting a 17-inch BBS LM138, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The centre bore and fitment of the BBS LM138 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
For the history behind the BBS LM138, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM138 | 5x112 | 17 | 8 | 35 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit