BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM139

  • Size11x18"
  • PCD5x120
  • OffsetET13

BBS LM139 is a part number from the LM range of two-piece mesh wheels. It is an 18-inch wheel, 11 inches wide and is listed for BMW, Z3M.

The 5x120 bolt pattern of the BBS LM139 is the one used by BMW and some Land Rover and Honda.

The BBS LM139 has a low ET13 offset, so the face sits well outboard; that is typical of older rear-drive cars and of wheels meant to fill the arches. Tyre widths of roughly 275-325 mm are the usual match for an 11-inch rim.

At 18 inches, the BBS LM139 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The centre bore of the BBS LM139 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

The BBS LM overview covers the background of the BBS LM139 and its siblings, their construction and buying tips.

Specifications

BBS LM139 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM1395x120181113———BMW, Z3M—

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models