BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM147

  • Size8.5x19"
  • PCD5x100
  • OffsetET25

This page covers the BBS LM147, one wheel from the LM, a two-piece mesh design with a deep polished lip. Size is 8.5J x 19 and is listed for Audi (VAG), Audi TT(8N).

On the BBS LM147, the 5x100 PCD is the one used by VW Group, Subaru and Toyota.

The BBS LM147 uses ET25, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.

Before fitting a 19-inch BBS LM147, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The centre bore of the BBS LM147 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

For the history behind the BBS LM147, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.

Specifications

BBS LM147 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM1475x100198.525———Audi (VAG), Audi TT(8N)—

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models