BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM148

  • Size10x19"
  • PCD5x120
  • OffsetET25
  • Lip2.5"

BBS LM148 is a part number from the LM, a two-piece mesh design with a deep polished lip. It measures 10x19 inches and is listed for BMW.

The 5x120 bolt pattern of the BBS LM148 is the one used by BMW and some Land Rover and Honda.

An offset of ET25 puts the BBS LM148 in the usual range for European saloons of its era. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.

Before fitting a 19-inch BBS LM148, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

Lip and barrel recorded for the BBS LM148: lip 2.5". You need these figures to order replacement rim halves or rebuild the wheel to a new width.

The centre bore of the BBS LM148 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS LM148 came from and how it is built is on the BBS LM page.

Specifications

BBS LM148 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM1485x120191025—2.5"—BMW—

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models