BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM170

  • Size10x19"
  • PCD5x130
  • OffsetET45

The BBS LM170 belongs to the LM family, often seen on European performance cars. It is a 19-inch wheel, 10 inches wide and is listed for Porsche.

On the BBS LM170, the 5x130 PCD is the one used by Porsche and some Mercedes-Benz.

ET45 is a high offset for the BBS LM170, so it tucks well inside the arch, as front-drive and most modern cars need. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.

Before fitting a 19-inch BBS LM170, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

No centre bore figure is recorded for the BBS LM170. Read the markings on the back of the wheel before relying on it.

More on where the BBS LM170 came from and how it is built is on the BBS LM page.

Specifications

BBS LM170 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM1705x130191045———Porsche—

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models