
BBS LM series
BBS LM171
- Size8x18"
- PCD5x114.3
- OffsetET50
This page covers the BBS LM171, one wheel from the LM family, often seen on European performance cars. It is an 18-inch wheel, 8 inches wide.
The 5x114.3 bolt pattern of the BBS LM171 is the one used by many Japanese and Korean cars.
ET50 is a high offset for the BBS LM171, so it tucks well inside the arch, as front-drive and most modern cars need. An 8-inch rim normally takes tyres from about 205 to 245 mm wide.
At 18 inches, the BBS LM171 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
No centre bore or fitment figure is recorded for the BBS LM171. Read the markings on the back of the wheel before relying on it.
More on where the BBS LM171 came from and how it is built is on the BBS LM page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM171 | 5x114.3 | 18 | 8 | 50 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit