BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM192

  • Size9.5x20"
  • PCD5x112
  • OffsetET36

BBS LM192 is a part number from the LM family, often seen on European performance cars. It is a 20-inch wheel, 9.5 inches wide.

On the BBS LM192, the 5x112 PCD is the one used by Audi, VW, Mercedes-Benz and later BMW.

At ET36 the BBS LM192 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 9.5-inch rim normally takes tyres from about 245 to 285 mm wide.

At 20 inches, the BBS LM192 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

The centre bore and fitment of the BBS LM192 are not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

For the history behind the BBS LM192, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.

Specifications

BBS LM192 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM1925x112209.536—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models