
BBS LM series
BBS LM193
- Size10.5x20"
- PCD5x112
- OffsetET36
This page covers the BBS LM193, one wheel from the LM, a two-piece mesh design with a deep polished lip. Size is 10.5J x 20.
The 5x112 bolt pattern of the BBS LM193 is the one used by Audi, VW, Mercedes-Benz and later BMW.
At ET36 the BBS LM193 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 10.5-inch rim normally takes tyres from about 265 to 315 mm wide.
Before fitting a 20-inch BBS LM193, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
No centre bore or fitment figure is recorded for the BBS LM193. Read the markings on the back of the wheel before relying on it.
More on where the BBS LM193 came from and how it is built is on the BBS LM page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM193 | 5x112 | 20 | 10.5 | 36 | — | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit