BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM228

  • Size9.5x19"
  • PCD5x120
  • OffsetET35
  • Centre borePFS mm

The BBS LM228 belongs to the LM, a two-piece mesh design with a deep polished lip. It is a 19-inch wheel, 9.5 inches wide and is listed for BMW.

On the BBS LM228, the 5x120 PCD is the one used by BMW and some Land Rover and Honda; the PFS mm centre bore decides whether you need hub-centric rings.

ET35 is a high offset for the BBS LM228, so it tucks well inside the arch, as front-drive and most modern cars need. A 9.5-inch rim normally takes tyres from about 245 to 285 mm wide.

Before fitting a 19-inch BBS LM228, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

For the history behind the BBS LM228, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.

Specifications

BBS LM228 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2285x120199.535PFS——BMW—

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models