BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM229

  • Size8.5x20"
  • PCD5x120
  • OffsetET32
  • Centre borePFS mm

BBS LM229 is a part number from the LM, a two-piece mesh design with a deep polished lip. Size is 8.5J x 20.

The 5x120 bolt pattern of the BBS LM229 is the one used by BMW and some Land Rover and Honda; the PFS mm centre bore decides whether you need hub-centric rings.

The BBS LM229 uses ET32, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.

Before fitting a 20-inch BBS LM229, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The fitment of the BBS LM229 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

More on where the BBS LM229 came from and how it is built is on the BBS LM page.

Specifications

BBS LM229 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2295x120208.532PFS————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models