BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM230

  • Size9.5x20"
  • PCD5x120
  • OffsetET37
  • Centre borePFS mm

The BBS LM230 belongs to the LM family, often seen on European performance cars. Size is 9.5J x 20.

The 5x120 bolt pattern of the BBS LM230 is the one used by BMW and some Land Rover and Honda; the PFS mm centre bore decides whether you need hub-centric rings.

At ET37 the BBS LM230 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 9.5-inch rim normally takes tyres from about 245 to 285 mm wide.

Before fitting a 20-inch BBS LM230, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The fitment of the BBS LM230 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

The BBS LM overview covers the background of the BBS LM230 and its siblings, their construction and buying tips.

Specifications

BBS LM230 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2305x120209.537PFS————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models