BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM239

  • Size10.5x20"
  • PCD5x114.3
  • OffsetET20
  • Centre bore66 mm

This page covers the BBS LM239, one wheel from the LM range of two-piece mesh wheels. It is a 20-inch wheel, 10.5 inches wide.

The 5x114.3 bolt pattern of the BBS LM239 is the one used by many Japanese and Korean cars; the 66 mm centre bore decides whether you need hub-centric rings.

An offset of ET20 puts the BBS LM239 in the usual range for European saloons of its era. Tyre widths of roughly 265-315 mm are the usual match for a 10.5-inch rim.

At 20 inches, the BBS LM239 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

No fitment figure is recorded for the BBS LM239. Read the markings on the back of the wheel before relying on it.

More on where the BBS LM239 came from and how it is built is on the BBS LM page.

Specifications

BBS LM239 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2395x114.32010.52066————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models