
BBS LM series
BBS LM240
- Size8.5x20"
- PCD5x114.3
- OffsetET43
- Centre borePFS mm
BBS LM240 is a part number from the LM, a two-piece mesh design with a deep polished lip. It measures 8.5x20 inches.
On the BBS LM240, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the PFS mm centre bore decides whether you need hub-centric rings.
ET43 is a high offset for the BBS LM240, so it tucks well inside the arch, as front-drive and most modern cars need. An 8.5-inch rim normally takes tyres from about 215 to 265 mm wide.
At 20 inches, the BBS LM240 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
No fitment figure is recorded for the BBS LM240. Read the markings on the back of the wheel before relying on it.
For the history behind the BBS LM240, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM240 | 5x114.3 | 20 | 8.5 | 43 | PFS | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit