
BBS LM series
BBS LM254
- Size9.5x20"
- PCD5x114.3
- OffsetET30
- Centre borePFS mm
BBS LM254 is a part number from the LM range of two-piece mesh wheels. It measures 9.5x20 inches.
The 5x114.3 bolt pattern of the BBS LM254 is the one used by many Japanese and Korean cars; the PFS mm centre bore decides whether you need hub-centric rings.
An offset of ET30 puts the BBS LM254 in the usual range for European saloons of its era. A 9.5-inch rim normally takes tyres from about 245 to 285 mm wide.
At 20 inches, the BBS LM254 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
No fitment figure is recorded for the BBS LM254. Read the markings on the back of the wheel before relying on it.
More on where the BBS LM254 came from and how it is built is on the BBS LM page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM254 | 5x114.3 | 20 | 9.5 | 30 | PFS | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit