BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM255

  • Size7.5x18"
  • PCD5x100
  • OffsetET35

This page covers the BBS LM255, one wheel from the LM range of two-piece mesh wheels. It measures 7.5x18 inches.

The 5x100 bolt pattern of the BBS LM255 is the one used by VW Group, Subaru and Toyota.

At ET35 the BBS LM255 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. Tyre widths of roughly 195-235 mm are the usual match for a 7.5-inch rim.

Before fitting an 18-inch BBS LM255, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

No centre bore or fitment figure is recorded for the BBS LM255. Read the markings on the back of the wheel before relying on it.

More on where the BBS LM255 came from and how it is built is on the BBS LM page.

Specifications

BBS LM255 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2555x100187.535—————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models