
BBS LM series
BBS LM256
- Size10x20"
- PCD5x114.3
- OffsetET45
- Centre borePFS mm
This page covers the BBS LM256, one wheel from the LM family, often seen on European performance cars. It is a 20-inch wheel, 10 inches wide.
On the BBS LM256, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the PFS mm centre bore decides whether you need hub-centric rings.
ET45 is a high offset for the BBS LM256, so it tucks well inside the arch, as front-drive and most modern cars need. A 10-inch rim normally takes tyres from about 255 to 295 mm wide.
At 20 inches, the BBS LM256 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.
The fitment of the BBS LM256 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
For the history behind the BBS LM256, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM256 | 5x114.3 | 20 | 10 | 45 | PFS | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit