BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM257

  • Size9.5x19"
  • PCD5x114.3
  • OffsetET50
  • Centre borePFS mm

This page covers the BBS LM257, one wheel from the LM, a two-piece mesh design with a deep polished lip. Size is 9.5J x 19.

On the BBS LM257, the 5x114.3 PCD is the one used by many Japanese and Korean cars; the PFS mm centre bore decides whether you need hub-centric rings.

At ET50 the BBS LM257 has its mounting face well outboard of the centre line, which pulls the wheel inward; that suits front-drive and modern hubs. A 9.5-inch rim normally takes tyres from about 245 to 285 mm wide.

Before fitting a 19-inch BBS LM257, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

No fitment figure is recorded for the BBS LM257. Read the markings on the back of the wheel before relying on it.

For the history behind the BBS LM257, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.

Specifications

BBS LM257 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2575x114.3199.550PFS————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models