BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM258

  • Size8.5x19"
  • PCD5x120
  • OffsetET35
  • Centre borePFS mm

BBS LM258 is a part number from the LM family, often seen on European performance cars. It measures 8.5x19 inches.

The 5x120 bolt pattern of the BBS LM258 is the one used by BMW and some Land Rover and Honda; the PFS mm centre bore decides whether you need hub-centric rings.

ET35 is a high offset for the BBS LM258, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 215-265 mm are the usual match for an 8.5-inch rim.

At 19 inches, the BBS LM258 also has to clear the brake calipers of the car it goes on; that matters most where the brakes have been upgraded.

No fitment figure is recorded for the BBS LM258. Read the markings on the back of the wheel before relying on it.

More on where the BBS LM258 came from and how it is built is on the BBS LM page.

Specifications

BBS LM258 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2585x120198.535PFS————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models