
BBS LM series
BBS LM259
- Size9.5x19"
- PCD5x120
- OffsetET48
- Centre borePFS mm
BBS LM259 is a part number from the LM, a two-piece mesh design with a deep polished lip. Size is 9.5J x 19.
The 5x120 bolt pattern of the BBS LM259 is the one used by BMW and some Land Rover and Honda; the PFS mm centre bore decides whether you need hub-centric rings.
ET48 is a high offset for the BBS LM259, so it tucks well inside the arch, as front-drive and most modern cars need. Tyre widths of roughly 245-285 mm are the usual match for a 9.5-inch rim.
Before fitting a 19-inch BBS LM259, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.
The fitment of the BBS LM259 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.
More on where the BBS LM259 came from and how it is built is on the BBS LM page.
Specifications
| Model / part | PCD | Diameter (in) | Width (in) | Offset (ET) | Centre bore (mm) | Lip | Barrel | Fitment | Notes |
|---|---|---|---|---|---|---|---|---|---|
| BBS LM259 | 5x120 | 19 | 9.5 | 48 | PFS | — | — | — | — |
Size in inches, offset and bore in mm. How to read these figures.
Before you buy or fit