BBS LM style illustration
Illustration of the BBS LM design; no photo of this exact part number.

BBS LM series

BBS LM260

  • Size9x21"
  • PCD5x120
  • OffsetET32
  • Centre borePFS mm

This page covers the BBS LM260, one wheel from the LM range of two-piece mesh wheels. Size is 9J x 21.

The 5x120 bolt pattern of the BBS LM260 is the one used by BMW and some Land Rover and Honda; the PFS mm centre bore decides whether you need hub-centric rings.

The BBS LM260 uses ET32, a middle-of-the-road offset that suits many saloons and coupés from the 1980s and 1990s. Tyre widths of roughly 225-275 mm are the usual match for a 9-inch rim.

Before fitting a 21-inch BBS LM260, check caliper clearance as well as offset, especially on cars with larger aftermarket brakes.

The fitment of the BBS LM260 is not recorded here; the back of the centre usually carries the offset and part number, so check the wheel itself.

For the history behind the BBS LM260, how to spot a genuine wheel and what to check when buying used, see the BBS LM series guide.

Specifications

BBS LM260 specifications
Model / partPCDDiameter (in)Width (in)Offset (ET)Centre bore (mm)LipBarrelFitmentNotes
BBS LM2605x12021932PFS————

Size in inches, offset and bore in mm. How to read these figures.

All BBS LM models